RWD - Switching to DOT 5 with old Master Cylinder
Try the improved search:                   

Volvo RWD 200 Forum

INDEX FOR 11/2008(CURRENT) INDEX FOR 8/2008 200 INDEX INDEX (NO RELOAD) [<<]  [>>]

 VIEW    READ ONLY    PRINT   SAVE   A    A 

Switching to DOT 5 with old Master Cylinder 200


Hi Gang, I've got the new caliper seals and all the hoses to go into my 1988 240. I've made the garden sprayer brake bleeder. My plan is to switch to silicone DOT 5, and not change the M/C. Can I blow out the brake lines before tear down and remove sufficent enough old brake fluid? I'd rather put the C note in other parts than buy a new M/C. I've read alot here and believe this would work, if not what would you think might happen? Thanks, Keith P.




Select, copy to buffer, and paste anywhere:


[about brickboard ads]

THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD
New Switching to DOT 5 with old Master Cylinder [200]
posted by  Trickflier  on Tue Aug 26 21:39 CST 2008 >


[about brickboard ads]

<< < > >>


Users marked in green are currently online.

©Jarrod Stenberg 1997-2007. All material except where indicated.


Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

All participants agree to these terms.
Powered by Denizen - Custom Software for Enthusiasts