Error: you cannot edit this post. It has been too long since it was posted.

Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2017 V70-XC70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Still dealing with misfire V70-XC70 2000

Have you carefully inspected the wires going to the connector? On mine the black plastic loom covers were completely crumbled-- I have heard of intermittent problems when one of the wires gets pinched while installing the cover, causing a short. I replaced my covers with new loom material from ipd.

If you can't find wire damage, another option would be to get the wires/connector for #3 from a junkyard and splice them in. I would solder and heat shrink the wires.

Good luck!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Still dealing with misfire [V70-XC70][2000]
posted by  Robert S. subscriber  on Wed Dec 5 22:06 CST 2018 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.