Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2009 V70-XC70 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

camber kit? V70-XC70 1998

anyone out there ever have alignment problems? specificly, the inability to adjust the camber? Mechanic states I need a "camber kit" from volvo dealer. any ideas or feedback would be greatly apreciated.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

camber kit? V70-XC70 1998

On my 95 850 the bolt holes holding the lower end of the strut are enlarged enough so you can shift the position a little before tightening. When disassembling I marked the position carefully so I could restore the same alignment.

Only a couple of degrees of variation is possible. What is the specific problem? If you are unable to get the alignment in spec is something bent?








  REPLY TO THIS MESSAGE    PRINT   SAVE 

camber kit? V70-XC70 1998

I don't believe anything is bent, however Firestone alignment tech says out of spec and can't adjust. Took it in originally for pulling to the right. thanx for your advice, I'll look for that.
Shane








  REPLY TO THIS MESSAGE    PRINT   SAVE 

camber kit? V70-XC70 1998

www.ipdusa.com has a camber kit, +/- 3 degree I believe







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.