Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2020 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Vacuum and fuel line clamp suggestion 850 1995

posted by  TimeToBakeTheDonuts on  Tue Jul 17 15:43 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Aug 29 16:10 CST 2013
[RELATED]

I am about to reinstall my evap purge valve, and although it was carefully removed, I'm not sure I will be able to reuse the factory-look clamp I removed from it.

The clamp is about 3/8" in diameter, and you Volvo folks will know it has the little tab that was bent over, and the two indents adjacent that act to clamp it on.

As Klaus has pointed out I may need a new fuel pressure regulator, I looked in that area and I see the same clamp.

So, my question is, if I don't discover how to reinstall these, would a stainless band clamp work in these locations? It seems like a clamp is a clamp, and this isn't the space shuttle. Just thought I'd ask.

Thank you in advance for any advice. Don '95 854T 182K






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Vacuum and fuel line clamp suggestion [850][1995]
posted by  TimeToBakeTheDonuts  on Tue Jul 17 15:43 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.