I need the little black rubber grommets that fit the 5/16 inch hole that is found in the two front doors of 850's and S/V70s by the latches.

Hello out there,

I removed the door moldings from my 765 (cause I think the car looks better w/o them) and discovered these 15 mounting holes on each side of the car. Winter is approaching and I would like to fill them.

Anyone sending their 850 or S/V70 to the wreckers, please remove these plugs (only 2 on each car) and mail them to me.

I would appreciate this very much. Just the cost of the stamp. I will donate an equal amount to brickboard.

Please leave message here how many you are sending as I only need fifteen.

Mail to:

Michael James
079681 Zion Church Road, Wiarton R 1, Ontario Canada N0H 2T0

Thanks again, MDJ. Safe brick motoring
--
1988 765TFM46 project car
--
1988 765TFM46 project car

In the meantime, to keep water out, get some clear packing tape. Wax the doors first with paste wax, then put on the clear packing tape. It is water proof.

Klaus
--
The 164 has a new home, all I am left with are a 95 854T and a 98 V70R :)