Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2004 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

850 pushing oil thru filler cap 850 1994

I have a 94 850 Non Turbo with 180K thats pushing oil
out the oil filler cap. I replaced the cap
gasket and still have the leak. I'm guessing
its a high pressure crankcase situation ?
I noticed a 1/2 chrome line thats coming from
the rear of the head to a metal cylinder that located
under the top motor mount. Is that something I should
be looking at. Thanks in advance, Mickey








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    850 pushing oil thru filler cap 850 1994

    If you don't fix the crancase pressure you will blow the rear cam seal or the rear main seal or both. First, check the PCV and make sure the lines are clear and the screen is tossed in the garbage.

    You might have to have the oil separator replaced along with both lines. It is a reasonable hard DIY, but a good excuse to clean the throttle body and get a new intake manifold gasket while you are at it.

    Now that the weather is getting nicer, knuckles don't hurt as much.
    --
    My name is Klaus and I am a V ♂ lv ♂ holic.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.