Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2010 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

How do I change my ignition switch? 850

Can someone help me with the following questions regarding an ignition switch change to my 1995 850 T5-R:

1) How do I get off the plastic housing around the ignition to get at the switch?
2)Which type of screws are they?
3)How many screws are there?
4)Where are the screws located?

Thanks








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    How do I change my ignition switch? 850

    4 torx screws! Two are very far up and need at least 4.5 inche extension on a driver. Some of us have bought a very cheap torx screwdriver and broken off the plastic handle. Makes for a very long drill bit!

    Klaus
    --
    Common sense trumps a PhD








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    How do I change my ignition switch? 850

    There are two TORX head screws under the steering column. I believe they're #15's. Once you get the plastic housing off the ignition switch comes apart very easily.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.