Volvo AWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2004

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

How to remove ABS controller (rusted bolt head)

uid 1839's pic
posted by  Brian M. on  Mon Aug 17 11:32 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Sep 5 08:08 CST 2014
[RELATED]

I attempted to replace the original ABS controller on our 1998 S70 (red) Volvo. I have the E5 torx and was very careful in not rounding the bolt heads but, one of the bolt heads seemed to have rusted more than the others and the socket bit isn't biting. It's such a tight area for me to try something. Any suggestions?

Thanks in advance.
--
Brian M. - 1998 S70GLT, 1998 S70 GTA








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    How to remove ABS controller (rusted bolt head)

    posted by  someone claiming to be Mr. Norm on  Thu Aug 20 09:25 CST 2009 [RELATED]

    If you have room, use a carbide disc in a Dremel to cut a slot across the screw head and use a conventional screwdriver.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.