Volvo AWD S80 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2001 S80 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Question about replacing engine mount on top of engine. S80

posted by  G Squared on  Mon Aug 24 08:34 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Sep 13 07:08 CST 2010
[RELATED]

The large, circular engine mount (bushing) located on top of the engine that attaches to the large black stabilizer bar that runs between the shock towers is shot and needs to be replaced.

My question is...is it necessary to also replace the two bushings on either end of the stabilizer bar? There is "some" wiggle in the bar when I rock it back and forth (fore and aft) but that might be normal? I took the bushings out to look at them and they seem intact, i.e., the metal collar has not separated from the rubber part.

Any input appreciated. Thanks.
--
2001 S80 2.9 (non-turbo), 128K miles






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Question about replacing engine mount on top of engine. [S80]
posted by  G Squared subscriber  on Mon Aug 24 08:34 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.