Volvo AWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2009

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Aftermarket Audio

posted by  someone claiming to be Black Metallic on  Sun Feb 4 17:12 CST 2001 [RELATED]

Would there be any complications if I installed a 2 DIN Kenwood in place of the 816 model that comes with the US version of the car? If anyone has done this, would ou please let me know







  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Re: Aftermarket Audio

    posted by  someone claiming to be Pete on  Mon Feb 5 10:13 CST 2001 [RELATED]

    I have an aftermaket single DIN with custom mounting plate/bracket. From my experience with my install, it should be easy for 2DIN. Size opening is correct for 2DIN, but don't know about volvo mounting chassis (mounting clips, etc.). If you have a compatable wiring harness (not needed, but alot easier). You should be able to get away with it, hopefully with few or no mods. Report back on how it goes.

    Pete.






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.