Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2005 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

seat belt stuck 850 1996

Hi all, my seatbelt will not release from its retracted position. I have tried all the release/ slow pull methods and despite a little movement the belt will not release, and of course i have tried it with the car on the flat level surface. Any suggestions gratefully accepted. Thanks David








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

seat belt stuck 850 1996

To be safe, I suggest getting a new belt. What happens is one of the 2 pins that holds the inertia ring has slipped/bent out of position. It is possible to bend it back in 'shape' and reinstall it, but I would never trust the belt to do what it is supposed to do after that.

Yes, new belts are expensive. But breaking your sternum is more expensive.

Klaus
--
There is no present time, just the past and future








  REPLY TO THIS MESSAGE    PRINT   SAVE 

seat belt stuck 850 1996

Which belt?
Assuming it's one of the fronts, you may want to try removing the seat side cover and then remove the bolt holding the dumb end of the seat belt from the seat frame.
Perhaps you can then work some of the belt back into the retractor to free up the pawl.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.