Volvo AWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2015

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Help. Need to ID part. How to upload pix from iPad.

Hi all,

I replaced the PNP switch on my 1998 S70.

Now I found this part, brass colored looks like a bushing with a "C" shaped arm attached. Haven't a clue what it is or where it is from.

Read instructions and still can't upload photos.

Please help.

Bryan








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Help. Need to ID part. How to upload pix from iPad.

    Depending on the size, a lot of things fall down there and get left behind. I don't know of any brass fittings around the PNP, but I suggest that you look at the part carefully and see if the 'C' portion is actually broken off metal - which could come from attachment to the battery or some other electrical connector.

    Klaus
    --
    My name is Klaus and I am a V ♂ lv ♂ holic








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Help. Need to ID part. How to upload pix from iPad.

      Hi Klaus,

      Thanks for the prompt response. Wish I could post the pictures.

      It's not broken and looks it fits on a shaft somewhere. OTOH it might have been left by the mechanic who replaced the drive axle.

      Thanks,
      Bryan







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.