Volvo AWD S70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2002 S70 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

E-Brake shoes HELP S70 1998

Car is v70 not awd so similar to a s70 set up. I have done a couple of these in the past this is why i am at my wits end.

e-brake shoes attach with bottom spring, make sure bottom ebrake cable gizmo is in the shoe knotches. Everything looks good.

When I place the top adjuster in , it is fully depressed, the shoes are expanded to much and can't get the rotor on. The rotor fits no problem without the adjuster.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    E-Brake shoes HELP S70 1998

    On our '04 V70 the adjuster bar could look like it was located correctly, but it was not. Make sure the fork is in the right notch.

    Greg








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    E-Brake shoes HELP S70 1998

    Have you tried pushing the shoes around, until they are centered on the dust shield? I was having the same trouble getting the rotor on, until I pushed the shoes down a bit. Sounds like your star adjuster mechanism is threaded all the way in, so all good there.
    --
    1998 S70 T5, 5-speed manual, 228000 miles








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      E-Brake shoes HELP S70 1998

      ...and make sure the clips retaining the e-brake shoes are in good condition. I had the same issue during a recent brake job, changed the clips for new, unrusted, unbent ones, and the problem was solved..







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.