Volvo AWD S60 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2005 S60 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

How to replace '01 S60 heater hoses S60

posted by  Marlin Mangels on  Thu May 29 11:18 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 21 15:41 CST 2014
[RELATED]

How do the heater hoses release from the firewall connections? The engine ends appear to be clamped. I ordered new hoses to keep on hand, but is there something in the firewall connection that I should also keep?
Marlin Mangels








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

How to replace '01 S60 heater hoses S60

posted by  KlausC on  Thu May 29 13:35 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

No sure with the S60, but here is a wordy Utube example:
http://www.youtube.com/watch?v=89GRaG1FDFI

Usually, the hoses are clamped to prevent the heater core from leaking all over the cabin. Check the heater core for leaks and if it does, do the easy replace.

--
My back feels better when I sit in a Volvo seat








  REPLY TO THIS MESSAGE    PRINT   SAVE 

How to replace '01 S60 heater hoses

posted by  Marlin Mangels on  Thu May 29 16:00 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 21 15:41 CST 2014
[RELATED]


Do you know if the S60 release for the end at the firewall is the same as
the 850?
Marlin







  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

How to replace '01 S60 heater hoses

posted by  KlausC on  Thu May 29 18:06 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

I cannot verify if it is the same for your car. If it has the yellow plastic clips, I would suspect they are the same quick release clips. Volvo has a habit of keeping the same parts if they last a long time and are cheap to make.
--
My back feels better when I sit in a Volvo seat







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.