Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2006 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Starter doesn't fully disengage 850 1997

posted by  mwhittie on  Mon Jun 27 10:29 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 28 21:36 CST 2014
[RELATED]

Howdy,

My 97 850 GLT turbo starter was not fully disengaging. I figured I would remove the starter and replace it with a reman. It is still making the same noise upon reinstallation...I have read on some posts that the ignition switch can cause this problem. My question is...is there a way to test this circuit before I go in the hole another 56$ for an ignition switch? I looked everywhere in the archives to find the info but was unable to...

Thank you,
Mark

2-850's and a bijillion mile 240...






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Starter doesn't fully disengage [850][1997]
posted by  mwhittie subscriber  on Mon Jun 27 10:29 CST 2016 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.