I have a 1992 965 with a Chevy LS motor and I'm trying to upgrade the seats. I have a front set from a V70R that I wish tp install. I've figured out the wiring for the passenger seat but not the drivers side. How do I power up the ECU for the seat. I know the heavy red and black wires drive the motors but I cannot figure out the wiring to power up the control module-the equivalent of the violet wire on the passenger side.
I've welded up the seat rails from the 960 to the V70 to make the installation fit but I cannot figure out the wiring. I do not know what year V70R they came from.
Any ideas?

BTW: If this is not an an appropriate post please delete it with my apologies. I have been trying to get full access to the Turbobricks site but cannot access the adds section, post questions or reply to posts. I get no response from the web administrator (they may not get my enquiries). If anyone has contact info for the site manager please let me know and if someone could post my question regarding the seats on the Turbobricks site I would appreciate it. I am keen on getting to the bottom of this issue as soon as possible.
Thank you.