Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2006 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Turn SIgnal lever/ switch replacement! Help! 850

posted by  ramesh on  Sat Mar 30 03:48 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hello:

My 1994 Volvo 850 turn signal lever is broken (literally), and I need to replace it. The question I have is as follows:

1. I removed the two torx screws holding the shroud on the bottom - easy.

2. Will dsiconnect battery - easy

3. There seems to be something holding the top and bottom pieces of the black plastic shroud! Is this a snap fit, or are there additional screws in the deeply recessed holes I see at the bottom. If so I would like to know exactly what kind of fasteners are holding the two pieces together, so I can get the right extra long hex or torx bit for opening this! It is very hard to see the fastener head from deep below!

Any other things I should watch out for.

Your help would be much appreciated.

Thanks
Ramesh






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Turn SIgnal lever/ switch replacement! Help! [850]
posted by  ramesh  on Sat Mar 30 03:48 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.