Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2002 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Best badge glue? 850

posted by  Erwin on  Mon Dec 30 05:41 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 10:39 CST 2014
[RELATED]

My wagon de-badged it's tailgate. All three, "Volvo", "850" and "Turbo" fell off within the last month. Fortunately, they all fell off in my driveway when I gently closed the gate.

What's the recommended glue? Hot melt? Super glue?
--
Erwin in Memphis, '95 855t








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Thanks 850

posted by  Erwin on  Tue Dec 31 05:27 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 10:39 CST 2014
[RELATED]

I have a roll of the 3M double-sided tape. I'll try it.
--
Erwin in Memphis, '95 855t








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Best badge glue? 850

posted by  james_a_sousa on  Mon Dec 30 13:57 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 18:51 CST 2014
[RELATED]

The 3M foam tape is pretty good. I re-installed a pair of Volvo ventvisors with the stuff and it lasted for 4 years before it started coming loose. The ventvisors lead a pretty hard life. The tape on new ventvisors is clear.

I'd be tempted to see what your dealer has to offer. Our '88 740 shows no signs of losing its badges.

Are there any signs that the emblems were replaced by someone?

I would remove another badge from the car to see if the glue is the same. Also to check its condition. Gluing on 4 badges is not much harder than three.
--
3 8s & 2 7s 725,000 miles total








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Best badge glue? 850

posted by  Dennis 850GLT on  Mon Dec 30 10:57 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Aug 13 08:42 CST 2011
[RELATED]

Erwin

DONT use glue, use instead a double sided acrylic foam tape made by 3M, available in auto parts. This tape is specially designed for that purpose.
you'll need an exacto to trim around and clean your badges and tailgate
surface with isopropyl alcohol.

Dennis






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.