Volvo AWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2011

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

abs codes how to pull

posted by  kenk on  Wed Jul 30 13:09 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

have the abs and tracs light, haynes states it should be accessable on my 96 though OBD. I have alexpeppers obd-2.com scan tool, under codes next to "current codes" it shows 0 and then next to that "1 new" but then shows p0000 no codes, and it also says "no response for history". Not sure what to do

went to autozone no luck there, guy tried but no codes. Really polite and nice about it though.

anyone pull ABS codes with alexpeppers tool? If so can you post your config settings in the gateway (from all 3 tabs)


i have a fast tricom model, tried a lot of differnt options, kinda frusterated.

also i recall some open source stuff for scanning, is there anytihng that works with alexpeppers tool?








  REPLY TO THIS MESSAGE    PRINT   SAVE 

abs codes how to pull

posted by  kenk on  Wed Jul 30 14:07 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

http://homepage.mac.com/k_kass/scan.jpg
there is a link to the screenshot

note the "1 new" and no response under no codes.








<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.