Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2010 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Engine RPM senor bad???? 850 1995

posted by  deltaclipper on  Mon Feb 23 01:39 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I am getting an A2/2-1-4 code showing a bad/intermitent bad signal on the RPM sensor. Is this sensor easy to replace?

thanks....
alan.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Engine RPM senor bad???? 850 1995

    posted by  someone claiming to be bob on  Mon Feb 23 13:23 CST 2004 [RELATED]

    It's not horrible, but it is a tight squeeze. The sensor is at the rear of the engine block, pretty much in the middle, at the level of the top of the bell housing. 1 screw, 10mm socket, and it pulls out of the sleeve. Has about 10" wire molded to the sensor, conects to engine harness at roughly the back of the head.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.