Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2007 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

GLE Valve cover gasket! 850 1995

Hi!

Does anybody have any pics. & torque data on how to change my 1995 850 GLE Valve cover gasket? By the look of it it looks a liitle bit difficult, because of te lots of bolts..:o)
Any suggestions?

thnx: Vikinng








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

GLE Valve cover gasket! 850 1995

Yuri hit that one on the head, see a pro. You do not have a conventional valve cover or gasket on the b5254f motor, or any of the white engines for that matter. What you may think is the valve cover is actually the cam cover and it is one big piece of aluminum that has the upper cam bearing surfaces machined right into it. The gasket is actually a liquid gasket that is akin to loctite and you have to paint the stuff on with a short haired roller.
Why is it that you feel it is necessary to pull the cam cover anyhow? In my experience, they never really leak unless someone has already been in there and done a substandard job of putting it back together.


Rule 308








  REPLY TO THIS MESSAGE    PRINT   SAVE 

GLE Valve cover gasket! 850 1995

If not sure - go to a professional. Can be more expensive to re-do the job the right way.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.