Volvo AWD 850 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2004 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Winshield container replacement 850 1996

posted by  Jimener2002 on  Thu Apr 22 08:41 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jun 28 15:40 CST 2007
[RELATED]

Does any one know how to replace the winshield container on an 850t 96?? can't get this thing out!








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Winshield container replacement 850 1996

posted by  skydvr on  Fri Apr 23 02:58 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Dec 1 01:26 CST 2007
[RELATED]

to remove windshield washer container remove two 10mm head bolts on either side of the container. you will find them from under the car and may have to remove some plastic or pry fender outwards to see them. then pull straight dowm on resevoir to loosen, then remove the pump, and the resevoir should come out.
be aware that the filler neck will stay in the encine compartment. good luck!!







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.