Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2017 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

srs code 2-4-2 850 1993

Hi, got code 2-4-2 from module B terminal 5 it says seat belt tensioner right, break in wiring, reset but instantly returns, I have no diagram, does anyone know where to look or had the same problem. Thanks Joe.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

srs code 2-4-2 850 1993

i have the same fault for mine, the only thing I recommend is just reseting the codes, I have jiggled the wires on the right selt belt tensioner (you have to pull off the cover) and a bunch of other connections and never have helped. Wish I could be more help, let me know if you find out anything else








  REPLY TO THIS MESSAGE    PRINT   SAVE 

srs code 2-4-2 850 1993

hi so you haven't been able to clear, and found conections under the cover the door pillar? and where else joe








  REPLY TO THIS MESSAGE    PRINT   SAVE 

srs code 2-4-2 850 1993

Take the cover (A-pillar) off and unplug the harness, check for corrosion on the contacts. Brush them off and spray with some contact cleaner, plug it back in, clear the codes and see if they stay cleared.


Mike







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.