Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2013 V70-XC70 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

How to change engine mount V70-XC70 1998

posted by  Ray J on  Fri Oct 15 11:38 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I am trying to change the engine mount (front of engine down by the CV joint.) I see the instructions at bay13 but I can't see how to get the 2nd 17mm bolt out. There is a pulley and other stuff in the way. This is supposedly an easy job, any idea on how to do this? Do I need to remove the 14mm bolts first then raise the engine slightly to get enough clearance? (This would be opposite of what bay13 says.) Thanks








  REPLY TO THIS MESSAGE    PRINT   SAVE 

How to change engine mount V70-XC70 1998

posted by  someone claiming to be bob on  Sat Oct 16 11:05 CST 2004 [RELATED]

Yes. Remove the 2 14's and jack up the engine a bit to get to the bolt.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Bob's got it............. V70-XC70 1998

posted by  someone claiming to be masher on  Mon Oct 18 01:59 CST 2004 [RELATED]

rewmove the 14mm then jack it........you'll be glad you did!







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.