This is going to be a little long winded. About 1 & 1/2 months ago my wife hit a huge pot hole & bent the pass side wheels. I had aftermarket wheels from my other car that met the 5 X 4.25(108)bolt pattern w/ 43mm offset. After changing out the wheels & tires for the new wheels & tires there was a bad vibration. The tire shop noticed that I needed centric spacers for the wheels. I got these had them installed & not the vibration is much less, but still occurs on occation while driving at hwy speeds. It is probably doing it at slower speeds, but is not as noticable. Anyone know why this is happening? Do I need to get Volvo specific wheels?

I second Tire Rack for new wheels. Pick some you like. Treat your wife for Christmas !


www.Tirerack.com

Sure sounds like it, or get the bent ones straightened. I found a place called Wheels America or sumthin like that in the classified section of AutoWeek, have also seen them in Car & Driver, straighten any wheel for $109. They have a half dozen locations thru out the US.

Or call TireRack for new wheels.

Sure sounds like it, or get the bent ones straightened. I found a place called Wheels America or sumthin like that in the classified section of AutoWeek, have also seen them in Car & Driver, straighten any wheel for $109. They have a half dozen locations thru out the US.

Or call TireRack for new wheels.