Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2010 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

850 heater core removal 850 1995

posted by  someone claiming to be ddp on  Sun Feb 20 10:50 CST 2005 [RELATED]

The haynes book says to pull the heater core rearward (after removing securing screws) to disconnect the two heater hose connections. My connection does not want to seperate. On the 1995 is there another connection or ? that has to be disconnected. Any other suggestions? The reason for removal is a slight leak. Any history with core leakage or problems with the "O" rings that are on the two hose/pipes?








  REPLY TO THIS MESSAGE    PRINT   SAVE 

850 heater core removal 850 1995

posted by  someone claiming to be Dave on  Mon Feb 21 05:12 CST 2005 [RELATED]

I replaced the heater core on my '95 850 recently using the the volvospeed procedure as my guide. You can view the pictures at

http://www.volvospeed.com/vs_forum/index.php?showtopic=9717&hl=Jeater

or just go to the volvospeed.com wepsite and look it up in the FWD/AWD forum under "Volvospeed Useful Threads for Repairs." It does take a little force to free the fitting once you have removed the fitting screw. My O-rings were fine and the new core corrected the problem.

Dave







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.