Volvo AWD S40-V40 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2004 S40-V40 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

MAP sensor replacements S40-V40

posted by  cyclone152 on  Fri Apr 29 15:51 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Could anyone tell me how to replace the MAP sensor on a 2000 S40? Is it difficult to access? I took a look to see if I could find it, but I wasn't sure exactly were it is located. My car has been running rough, and the dealer says I need to have it replaced. I appreciate any advice.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    MAP sensor replacements S40-V40

    posted by  someone claiming to be Miker on  Sat Apr 30 04:23 CST 2005 [RELATED]

    Cyclone

    The MAP sensor is on the bracket on the firewall. It's the one with the vacuum hose at the base.

    The bracket is covered by the black plastic cover. Remove it, then you'll see the sensors.

    Miker








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      MAP sensor replacements S40-V40

      posted by  cyclone152 on  Tue May 3 12:59 CST 2005
      Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

      Thanks for the response Miker. I think I found the sensor, but there is no vacuum hose connected at the base. I guess it came loose somehow. I searched around, but I can't find the loose hose anywhere. Do you have any idea how this hose would be routed?







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.