Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2002 850 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Reinstalling that 10 mm bolt on oil cooler lines------ 850 1994

Am looking for suggestions on the best way to reinstall the 10 mm bolt holding the metal portion of the oil cooler lines to the engine. It was a bear to get off as it is parked next to the AC compressor bracket. Have the rest of it all hooked up. The reminder of the project was not bad.

Suggstions welcome,

dick








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Got it!! 850 1994

Used a piece of 3/4 inch long vacuum tubing, bolt head pushed in followed by a 1/4 inch flex shaft attatched. Started it and then turned to slightly more conventional tools to complete it.

dick








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Got it!! 850 1994

I love ingenuity, or how ever you spell it :)

Klaus
--
98 V70Rawd(108Kmi), 95 854T(88K mi), 75 164E(173K mi)








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Got it!! 850 1994

I never thought of that vacume hose trick and nearly killed myself and everybody any where near me. Never want to do this job again.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.