Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2008 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil Separator / Oil Trap 850 1993

I have a 93 non-turbo 850 and I am trying to track down a oil leak.

Been through flame trap all that and am starting to think it might be in the oil trap. Problem is in comparing to a 94 850 I have the large hose from the flame trap going under the intake manifold. But there is no hose coimg up through the intake manifold and connecting to the cylinder head just to the left of the oil fill cap like in the 94 and up models have. There isn't even a notch in the cylinder head for the hose (looking right next to oil fill hole neck)

Is this another difference in the 93 model year? Assuming the hose from the flame trap goes the the oil trap, where does the other hose connect?

Don't look forward to removing the intake manifold but it looks like that is where the oil is mostly coming from and before I try to get into there really need some info on what I should be looking for.

Thanks

Tom






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Oil Separator / Oil Trap [850][1993]
posted by  someone claiming to be Boston Tom  on Mon Mar 20 06:41 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.