Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2003 V70-XC70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Code PO132, 138 V70-XC70 1998

posted by  someone claiming to be 98 V70AWD on  Mon Dec 18 08:44 CST 2006 [RELATED]

Need some help PLEASE. I recently aquired a 98 V70 AWD with 119K. The Check Engine light came on and I went to the parts store to read the codes. O2 Sensors too high voltage. I replaced both sensors with Bosch Universals. I replaced them one at a time. First the front one then code check indicated the rear was okay. A call to Bosch was to replace the other. I did and both codes returned. I asked someone w/ an OBDII scanner to read it for me. Minimal experience yielded that the O2 sensor reading was 1.07v. I do not know what to determine from that. I have seen other postings to check the vacuum lines and grounds. I think I have done that but I did not get any specifics on where to look there are many vacuum lines and grounds on the car.

Sorry so long. I hope this is enough for someone to assist in the troubleshooting.

Thank you.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Code PO132, 138 [V70-XC70][1998]
posted by  someone claiming to be 98 V70AWD  on Mon Dec 18 08:44 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.