Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2004 V70-XC70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

drive axle bolt size V70-XC70 2000

posted by  justin21x on  Sun Apr 1 14:39 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue May 13 08:24 CST 2008
[RELATED]

I've replaced both struts and the left side drive axle. When buttoning everything up pretty much the last thing was tightening the retaining bolt that goes into the end of the axle shaft and retains the wheel hub. I felt the snap, and backed it back out of the hole. It torqued off the end about half way down the length of the bolt, but it held on by a tiny piece and managed to come out complete (very lucky there.)

The question is the exact pitch of this bolt. I'm pretty sure it's a 10x70mm, but I'm not entirely sure of the pitch and I certainly don't want to mess up the threads on my new axle.

Anybody have any ideas? Info? Thanks!!

Cheers,
Justin
--
'86 245, 188k, '00 V70 98k






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New drive axle bolt size [V70-XC70][2000]
posted by  justin21x  on Sun Apr 1 14:39 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.