Volvo AWD S70 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2007 S70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

roof trim moldings - minor peeling S70 1998

posted by  someone claiming to be Brian M. on  Thu Dec 13 02:30 CST 2001 [RELATED]

I just had a LOF service at the dealer and pointed out that one end (endcaps?) of the molding on each side were slightly peeled. I mentioned to them that I was thinking of just applying a touch of glue but wanted to see what they can do about it first. The dealer ordered new moldings (pn-9190459 and pn-9190460) and the work will be covered under warranty.

My question is: Is this a simple thing for the dealer to replace the roof moldings? Is adhesive normally used?

The reason I asked is because of my previous experience with the bubbling door panel saga which was suppose to be simple but required close to 10 visits to the service department until the issue was resolved (I finally got 4 new door panels instead of just the messy re-skinned panel inserts, BTW). Due to this I am hesitant to have a tech work on interior/exterior body trims that require gluing.

Brian M.

1998 S70 GLT, 1998 S70, 1991 Maxima SE





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New roof trim moldings - minor peeling [S70][1998]
posted by  someone claiming to be Brian M.  on Thu Dec 13 02:30 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.