Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2015 V70-XC70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

OBD Connector V70-XC70 98

posted by  someone claiming to be jon on  Wed Oct 31 12:06 CST 2001 [RELATED]

My Volvo's OBD-2 connector has the following pins 3, 4, 5, 7, 13, 16 populated. I know that ISO 9141 calls for pins 4, 5, 7, 15, 16. I assume that pin 3 is for Volvo purposes but what about the switch 15 with 13?

Did they move pin 15 (ISO 9141-2 L line) to pin 13 to make life harder for

generic scan tool manufacturers? If a Volvo scanner is used there is no problem reading the codes and doing diagnostics.

Do I need the connection provided by pin 15 (ISO 9141-2 L line) or pin 7

(ISO 9141-2 K line) should be sufficient to read the codes?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New OBD Connector [V70-XC70][98]
posted by  someone claiming to be jon  on Wed Oct 31 12:06 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.