Volvo AWD S70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2001 S70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

S70 no start (new thread) zero compression on all 5 cylinders ??? S70 2000

posted by  KlausC on  Fri Aug 13 06:44 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

I don't wish to add to the pile of horse manure, but I have seen plenty of engines run with that configuration. Which is why I tell people to count the teeth between the cams before they pull off the belt. The code will be set to indicate that timing is off, the ECU will compensate, and the engine will run fine.

Did you release the tension? The intake looks like it is straining pretty hard. But a release will not move the cam a full tooth.

Yes, you need to reset the timing. But first you need to find that hairline crack that Volvo calls a crank timing mark.

I am still puzzled by the slow cranking. With the plugs out, the crank should turn 'easily' by hand. PO didn't run out of oil did he?

Klaus
--
Two good Volvos, a 220 and a V70R






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New S70 no start (new thread) zero compression on all 5 cylinders ??? [S70][2000]
posted by  awilson subscriber  on Sun Aug 8 16:42 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.