If I stand in front of the car and look strait at the bracket..

The bracket that mount on the fire wall lean toward the left side not bend

look like all the load and the pushing from the engien mount stuck to the left on that bracket... it also making a small groove cut on the bracket..

What do I need to do I can push the bracket that mount in the fire wall stait back and line up with the engien pushing... Do I need to torque it down do it won't sliding back to one side again..

My question is do the brack on the wall and engien pushing need to line up strait together?? and not stuck to one side>>

Thanks for all input... I been a very busy bee on this car...