Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2001 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

going to try ipd 2B1850 - Polyurethane Upper Engine Stabilizer Mount 850 1995

posted by  Three5bangers on  Fri Aug 26 11:10 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jan 17 20:50 CST 2013
[RELATED]

I replaced my saggy right lower motor mount - mostly cause this torque arm bushing looked like it was sliding off towards the center. Now time to replace that crumbling torque arm bushing - once done by the dealer as part #9434263. Normally I wouldn't stray from volvo parts - but i didn't see anything in volvospeed's repair section on pressing out the bushing so I think I'll try the IPD part. Good idea?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New going to try ipd 2B1850 - Polyurethane Upper Engine Stabilizer Mount [850][1995]
posted by  Three5bangers  on Fri Aug 26 11:10 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.