Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2011 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

No Start after having to bleed Clutch Slave cylinder 850 1993

Hi Folks,
I just had to rescue my daughter's 93 850. Clutch pedal on the floor etc.
After I topped off the reservoir and bled the slave cylinder the clutch works great but the car will not start. I took a precursory look and did not see a "safety" interlock.
I must admit that it is late and I probably did not look as well as I could have. Is there a clutch/neutral interlock switch in the 850 ?
If there is one, where is it physically located ?
I kick started the car and drove it for awhile as one of the posts recommended that the pedal did not return to normal immediately.
I would appreciate anyone's experience here and give me the dope slap that I need.

Thanks in advance,
John






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New No Start after having to bleed Clutch Slave cylinder [850][1993]
posted by  Jollyjohn  on Mon Jul 9 00:11 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.