Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2010 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Installing OMP Strut Brace 850 1994

I was wondering if anyone could give me some more assistance with installing the OMP Strut Brace. I already looked at Volvospeed.com and had some additional questions about the installation.

Here are the questions I have before I even attempt the install:

1. Does anyone know the correct torque values when reinstalling the strut bolts?

2. Do I remove the black piece that holds the ABS cable and reinstall that piece over the brace?

3. Do I need to get a front-end alignment after I install the brace?

4. Do I move the washers that are currently between the bolts and tower to above the strut brace or below the strut brace? It looks like if you leave the black ABS holder I would leave them below the brace for leveling.

Thanks again in advance for the help!!!

Scott K







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Installing OMP Strut Brace [850][1994]
posted by  someone claiming to be Scott  on Mon Jan 15 07:28 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.