Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2006 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

ECU container 850 1996

posted by  someone claiming to be Ivan on  Tue May 2 17:54 CST 2000 [RELATED]

Fellow enthusiasts,

An attempt to satisfy my curiosity has been thwarted. The plastic box which houses the ECU and TCU (and ?) on my R has a black-painted metal strap securing its lid. At one of the horizontal ends on top of the box, this strap has a fastener, like a bolt with a conical head, with a small flat portion at its peak, in which there is no opening of any kind to accept a flat/PK/Torx/? bit. It screws into a captive nut on a vertical portion of this strap that disappears between the box and the right side of the engine-bay. Haynes (to MY96) makes no mention of this strap. What is the appropriate tool to use to be able to peer inside this housing? Is it some kind of rubber friction device attached to a rotating shaft or is the strap secured from underneath?

TIA

Ivan






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.