Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2006 V70-XC70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

high temp method to re-insulate wire at coil? V70-XC70 2007

posted by  Philip on  Sat Sep 3 14:44 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 10:21 CST 2014
[RELATED]

Oil from the broken breather tube under the plug/coil cover seems to have caused a small section (1/4 inch) of the insulation on the wire to the coil to corrode and fall off. I was going to use shrink tube insulation but the temperature rating for the kind I found at Autozone and Oreillys is rated for a max of 257 degrees. I am thinking that it gets hotter than that on top of the engine/under the plastic cover.

Does anyone have an alternative, eg, high temp rtv?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New high temp method to re-insulate wire at coil? [V70-XC70][2007]
posted by  Philip  on Sat Sep 3 14:44 CST 2016 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.