Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2004 V70-XC70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Pierburg purge valve vacuum connections V70-XC70 2000

posted by  e21Pilot on  Tue May 4 03:03 CST 2021
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Sep 27 01:59 CST 2014
[RELATED]

I was getting some fast food today and while at the order window, I could hear my engine making a popping sound from under the hood of my 2000 V70 XC SE.

When I got it home, I looked around for vacuum lines and found there was a Pierburg valve next to the radiator on the drivers side of the engine. It had a vacuum line going to it from under the intake manifold but only a 2" short piece of hose hanging down into the open air on its other port. I could not find any other rubber hose, filter or device to plug into that open hose.

I wonder what is supposed to be connected to the Pierburg hose that points downward? Since I don't have anything to connect to it, should I just block off the hose or keep it open?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Pierburg purge valve vacuum connections [V70-XC70][2000]
posted by  e21Pilot  on Tue May 4 03:03 CST 2021 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.