Volvo AWD V70-XC70 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2024 V70-XC70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

P0013 & P0335 V70-XC70 2000

I had a P0013 code and replaced the cam position sensor with an FER one from FCP.

I then got the P0013 back again along with a new P0335 and the engine cranked about 3 times more than usual.

Is that the symptom of a bad crank sensor? When the cam sensor was bad, I had no issue starting but now I do.

Is it common for the cam and crank sensor to go about the same time -- 194K in my case? Are the aftermarket sensors a good bet or should I go with the original Volvo parts for these two if they are still available?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New P0013 & P0335 [V70-XC70][2000]
posted by  e21Pilot  on Sun Dec 3 02:53 CST 2023 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.