Volvo AWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2012

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Flame trap

I took a look at my flame trap today to see how it was doing. Well the flame trap was in good shape but I found a few other problems. The first is that the “o” ring seems to be missing from the trap housing and I was wondering if this could cause trap housing to not fit tightly. BTW I found a good crusting of gunk in the housing and cleaned it out. I feels like it has a lot of wiggle room. Secondly the smaller of the two hoses on the part that holds the flame trap has a small hole in it. Where do this hose go? How easy is it to replace?

Thanks

Aaron 1997 854 n/a






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Flame trap
posted by  Rev5  on Tue Jun 25 08:27 CST 2002 >
  • New Flame trap
    posted by  someone claiming to be Ray N.  on Tue Jun 25 09:14 CST 2002 >
  • New Flame trap
    posted by  ed850  on Tue Jun 25 19:44 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.