Volvo AWD C70 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2006 C70 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Location of Oil Cooler & Pressure Sender, also aftermarket oil filter options? C70 1999

posted by  volvofan1 on  Mon Aug 26 14:22 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Sep 15 09:12 CST 2011
[RELATED]

Ok, still working on oil issues with this car. I noticed that there's a hard plastic ABS housing with a paper element inside that gets replaced. I'm guessing that a regular ol' screw-on filter from auto zone wouldn't be a direct swap in substitute. Of course, the paper element prolly has to come from the dealer. That's fine, I can deal with that, but I'd still like to plumb in a bypass oil filter somewhere. My two candidates so far are into the oil cooler line (although Paul S. mentioned that's probably thermostatically controlled so I'd only be filtering some of the time) or T into the pressure sensor location. Where are those two items located on my '99 2.3L HPT? Thanks very much in advance.

-Jon
--
1LT Jonathan T. Belmont-- '99 C70R 40K "Valdemar"







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Location of Oil Cooler & Pressure Sender, also aftermarket oil filter options? [C70][1999]
posted by  volvofan1  on Mon Aug 26 14:22 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.