I'm thinking of tackling spark plugs on my own.
Did some some searches and found some helpful tips :
- Don't remove connector[wire] from coil pack, just unbolt
and twist and pop off coil pack.
- Use small amount of antiseize the spark plug threads.
- Install new plugs with fingers not socket. Once seated
tighten lightly with long socket.
- Use a little dielectric grease in coil pack boot.
The turbo hose is over my spark plug cover.
This hose is not shown in my Haynes manual. Must I disconnect
both sides of the tube, or just one to get to the plugs.
Also, should I be intimidated by changing my own spark
plugs on my c70. I do level one stuff like oil changes, etc.
TY
RD 99'c70 hpt
|