Volvo AWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2002

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Question on 245 seat heater switch 1993

posted by  someone claiming to be 245_owner on  Wed Oct 15 13:56 CST 2003 [RELATED]

I reviewed some of the posts in here regarding cleaning the heater switches. I got one apart, but in doing so, I was unable to see how it should go back together.

question #1, is there only one ball bearing in the switch (or did I manage to lose one!)?

question #2, if there is only one ball bearing, where does it go?

One of the two springs stayed in place (hooray!). But the other came out, along with the ball bearing and a small strip of metal.

I assume the spring sits inside of a recess on the piece of white plastic and pushs up the small strip of metal (to make contact with the other connectors). I am guessing the ball bearing might sit between the spring that fell out and the small strip of metal that also fell out...

What am I missing?

Thanks

(p.s. This is one GREAT resource!! I just found it last night)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Question on 245 seat heater switch [1993]
posted by  someone claiming to be 245_owner  on Wed Oct 15 13:56 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.