I am experiencing this pre-ignition knocking sound during hard and just right acceleration and at the same time a haunting idle.
I've done research to find some suggestions/inputs for this kind of problem and to list some from the inputs of fellow brick owners like Robert A. Froebel and others as well;
* high temperature of fuel/air mixture in the cylinder
* high compression ratio
* high manifold pressure
* high operating temperature
* low octane fuel (does not apply because I use 93 octane)
* bad knock sensor (does it have to have error codes to replace if it is bad?)
From these kind of topic, there are some that suggests to check or replace:
* intake manifold gasket
* valve job
* knock sensors
I would really appreciate your help and expertise on these matter, thanks again.
chrisq 97 855 T5 70K
|