Volvo AWD 850 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2004 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

No Start - A6 codes 314 & 214 - replaced cam sensor - what now? 850 1993

posted by  Lilitchpin on  Tue May 10 07:34 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 05:03 CST 2014
[RELATED]

Went to go to work yesterday and my '93 850 wouldn't start. That evening checked codes and found 314 & 214 in A6 (ignition). Having seen posts for the cam position sensor causing at least the 314, I got a replacement (used) from local indy shop and replaced, also did tune up stuff while I was at it - plugs, dist cap & rotor.

Still no start and still getting 314 & 214 from A6 (yes I cleared codes).

Don't know where to go next, any ideas out there?

Other information - after some cranking getting gas smell so I assume fuel pump is pumping. Looked under timing belt cover, and belt still there and moving. Charged battery to eliminate some of those wierd electric problems when betteries get old. Even disconnected battery for a couple hours to be sure computer reset.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New No Start - A6 codes 314 & 214 - replaced cam sensor - what now? [850][1993]
posted by  Lilitchpin  on Tue May 10 07:34 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.