Volvo AWD 850 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2023 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

strut top nut 850

The star nut actually holds the spring seat in place, so you can take the top nut off. For safety, I don't unless either the car is on the ground or I have a spring compressor on there, you just never know.

Comment on the FCP video, they show the tech using a drift or wrench to tighten the star nut. That's a no go, star nut will loosen right up. Make a 4 side socket (you'll see when you see the star nut) from a cheap impact socket. If you don't have an impact gun, get a hand impact, you need to get that sucker torqued or it will loosen up (ask me how I know). Once strut is back in car and car is on ground, you can remove top nut and tighten star nut with some kind of impact. Good luck.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New strut top nut [850]
posted by  someone claiming to be dg  on Mon Mar 31 16:23 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.