Volvo AWD 850 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2015 850 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

bump stop clip 850

posted by  Earl850R on  Mon Mar 31 09:22 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I just replaced one of these clips on my 96 850R. It was a PITA :-) I first pushed the clip inside the bumstop and up through the hole in the top. Once the top of the clip was visible through the hole I held the bumpstop up using a 1/2" drive extension (it fits inside the bumpstop and allows you to put upward pressure on the clip). I used a large, flathead screwdriver and a little leverage (using the spring) and the clip snapped into place. Doing this while laying on my back and reaching inbetween the spring coils was interesting (I of course jacked that side of the car up to extend the spring).

Good luck!

-Brad.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New bump stop clip [850]
posted by  kahuna  on Sat Mar 29 02:49 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.